The chemical constituents of tap water contribute to the formation of limescale and yellowness. Gradually, rust appears on the bathroom. Removing it is not so difficult, but you need to do it correctly so as not to damage the enamel coating. Plumbing can be washed both with the help of household chemicals, and alternative methods. How to clean the bath from rust will be discussed below.
- The choice of household cleaning products
- Folk ways
- Hydrogen peroxide with ammonia
- Wine vinegar with salt
- Hydrochloric acid
- Some useful tips
The choice of household cleaning products
Before buying a cleaning product in order to wash the bath from rust, you need to carefully read the instructions on the label. The household chemical product should be intended for cleaning enameled surfaces, and if the instructions do not indicate this, the product most likely will not only not clean the rust, but may also destroy the enamel.
The fact is that detergents for cleaning sanitary and household appliances (for example, for a toilet bowl or gas stove) may contain sulfamic and oxalic acids. These substances are harmful to enamel coatings with frequent use. If the general cleaning of the bathroom is not carried out too often, the use of strong acids is allowed, but not more often than twice a month.
Note! Strong acidic substances are harmful to the skin. Based on this, it is recommended to use protective gloves. After finishing work, thoroughly rinse the bath surface with running water. This will help to completely get rid of remaining on the surface of acids and salts.
For frequent cleaning, it is recommended to use soap-based detergents. The extent of the problem should also be taken into account: fresh stains are much easier to remove than stale rust.
Note! If you do not clean the bathroom for too long, then corrosion will develop to such an extent that it will lead to the destruction of enamel in large areas. As a result, the bathroom will have to be changed.
Among the most popular rust cleaners are brands such as Kama and Surzha.
"Kama" is a cleaning powder, which is intended primarily for cleaning enameled plumbing. To clean the bath, you need to pour a little of this powdery substance (just one teaspoon) on a moistened sponge and wipe the problem areas with it. After cleaning, rinse the cleaned area with water.
"Surzh" is a pasty substance for removing rust spots. The substance is highly effective, but since it contains strong acids, it is not recommended to use it too often. To achieve the effect, as in the case of Kama powder, one teaspoon is enough.
to contents ↑Folk ways
Several effective methods are known to easily wash a bath from rust spots.
Hydrogen peroxide with ammonia
To prepare the solution you will need the following:
- clean and dry glass containers;
- rubber gloves to protect hand skin;
- 100 grams of ammonia;
- 50 grams of hydrogen peroxide.
The components of the solution can be purchased at the pharmacy. Mix ammonia with hydrogen peroxide. Mix the solution. We put the mixture on a clean, dry sponge and process the problem areas on the plumbing with it. Let humid places dry for 15 minutes, and then rinse the bath with running water.
to contents ↑Wine vinegar with salt
To prepare the cleaning agent you will need:
- glassware;
- microwave;
- 100 milliliters of wine vinegar;
- 2 tablespoons of salt.
We mix salt and vinegar and heat the solution in the microwave to 65 degrees. With a ready-made solution, wet a sponge or cloth and wipe the rust spots. Leave the bath for 20 minutes, and then rinse the solution with running water.
Hydrochloric acid
In this case, you will need only one cleaning component - a solution of hydrochloric acid. You must work with acid carefully, you will need protective gloves.
Advice! Before cleaning with hydrochloric acid, it is recommended to clean the bathroom with a household chemical product and rinse it with running water.
Stain Removal Instructions:
- we cover all chrome elements with a cellophane film;
- wear protective gloves;
- open the container with acid and use a sponge or cloth to apply liquid to problem areas;
- after wiped, wait another 15 minutes;
- wash off hydrochloric acid with running water.
If necessary, the procedure can be repeated again.
to contents ↑Note! It is strongly recommended not to use a paint brush when cleaning the bathroom. The fact is that when using a brush, it is almost inevitable to spray acid, which can get into the eyes.
Some useful tips
- To clean stains of bathtubs made of steel and cast iron, it is recommended to use a sponge with an abrasive surface. This sponge is safe for enamel.
- Do not use hard brushes, as such devices scratch the enamel. In addition, dirt is retained in the resulting defects, which further exacerbates the pollution problem.
- The most likely place for rust to appear is in damp places (at the overflow system, at the drain hole, and also in that part of the bath where the bath accessories are located). Therefore, to prevent the appearance of spots, it is desirable to maintain the bath in the most dry state. After taking a shower, you need to wipe the wet area with a dry cloth. To prevent excessive moisture, it is recommended to use a sink for washing.
- Do not put metal objects on the bottom of the bathtub, as their careless movement can lead to the destruction of the enamel coating.
- The surest way to combat dampness is to ventilate the room. You can use both natural ventilation and artificial.
It is much easier to carry out preventive procedures in time than to deal with rust spots that have already appeared. Only 5-10 minutes of regular cleaning, and the bath will delight with its whiteness for many years.
