15 popular products for an electrician with "AliExpress"

The work of an electrician is quite difficult and dangerous (for example, installation of bare wiring under voltage). Fortunately, the popular AliExpress website sells a large number of useful accessories designed specifically for electricians. They can be used when working in an apartment, private house or office.

Content:

• Multifunctional tool for stripping and crimping wires
• Set of multifunctional pliers NEWACALOX
• Shrink Tubing Set
• Voltage indicator
• Current clamp UNIT-T
• Magnetic Tool Bracelet
• Belt tool bag
• WORKPRO - electrician folding knife
• Wire twist tool
• Terminal Block Kits
• Set of tip sleeves
• Wire stripper
• Replica Tesa Fabric Tape
• Insulating Magnetic Screwdriver
• Wiring detector

These tools are inexpensive. They are useful, practical, easy to use. So that you know exactly which devices are useful in your work, we have prepared a useful rating of 15 popular products for electricians. All presented products have high consumer ratings, so their quality is not a concern.

Multifunctional tool for stripping and crimping wires

Useful device that helps:

• to remove insulation from cables;
• process wires of low-current systems;
• maintain the integrity of aluminum / copper conductors.

The special design of the tool allows crimping cable and wire products of various types, regardless of the number of cores, the type of braid, the presence of a shielded layer. The crimp is convenient to use. Has rubber handles. The spring return mechanism simplifies the work with the tool.

Set of multifunctional pliers NEWACALOX

Each qualified electrician must have this kit. Includes:

• standard pliers;
• narrow-nose pliers for working with thin wires;
• sharp nippers.

The tools are made of ultra-strong metal alloy, have an accurate design (tightly clamp the wires, do not bend them, cut clearly and accurately). The design has round slots with color marking designed to quickly remove the braid.

Shrink Tubing Set

Heat shrink tubes are designed for quick insulation of wires. They are made of polyolefin - a material that tapers when heated, but does not lose elasticity. To isolate a contact, you must:

• thread the cable into the connection sleeve;
• bring it to the junction;
• set in the center;
• heat with a hairdryer.

This will help make quality insulation. The kit includes pipes of several colors, which is convenient for marking wiring. Polyolefin couplings are available in 8 different sizes.

Voltage indicator

The tool will help you find out the exact voltage on the network. Designed to measure AC current, provides quick measurements. The indicator has the shape of a small pencil, so it is easy to use. Suitable for domestic needs and professional purposes. Thanks to its compact size, it is convenient to store it in the pocket of a work overalls.

It works in the range of 12-1000 V. The case is completely insulated, has no open parts and metal parts, which eliminates the risk of electric shock. Equipped with auto shut off function.

Current clamp UNIT-T

The pliers are designed to measure AC / DC voltage, have a backlit LCD display for easy data visualization. The tool is convenient to use due to fine tuning and smooth adjustment of operating parameters.

The main advantage of current clamps is their convenient design. The tongs are opened by pressing a button and have a wide range, which allows measurements of various electrical networks.

Magnetic Tool Bracelet

One of the most useful appliances for electricians. Fasten the bracelet to your wrist, fasten the necessary tools (screwdrivers, pliers, pincers) onto it and do not tear yourself away from work. Made of soft material, therefore, does not rub the skin of the hands.

Powerful magnetic inserts are sewn into the bracelet. Their attractive forces are enough to hold small and large parts: from screws to metal tools. It has a bright yellow color. Holds securely on the left and right wrist.

Belt tool bag

The standard solution for electricians. Hook the bag on the belt and store in it:

• pliers;
• set of screwdrivers;
• nippers;
• crimp;
• hammer;
• measuring instruments;
• roulette wheel;
• paint knife.

The waist bag has a convenient width adjustment, so it is suitable for people with different physiques. The plastic clip provides a quick snap when donning and holds the tool bag securely on your belt.

WORKPRO - electrician folding knife

The knife is designed for quick, accurate cutting of insulation from cable routes. Sharp enough to cut a thick PVC and rubber sheath from power cables.

The knife is equipped with interchangeable blades that are easy to change. Near the handle there is a plate for the thumb, which makes the handling of the knife convenient, safe. Special fasteners allow you to keep it in your pocket or on your belt.

Wire twist tool

With this useful tool, twisting the wires will not cause difficulties. Thanks to the special design, this device helps to wind one wire around the other, in a spiral, without damaging the conductive wires. It has several holes for cables of various diameters. Allows twisting at the same time from 2 to 5 wires.

Terminal Block Kits

Terminals are required for every electrician. This kit includes the popular terminal blocks with levers. Suitable for wires of various sizes. The contacts are made of phosphor copper, and the case itself is made of modified nylon.

The rated voltage of the terminals reaches 400 V, and the pulse voltage reaches 4 kV. The set includes several blocks of various sizes. Terminals are reusable.

Set of tip sleeves

When working with electrical wiring, you must have on hand insulated cable lugs designed for the terminal block.This kit contains all the necessary sleeve tips. They possess:

• popular sizes, therefore very easy to use;
• bright colors, which is convenient for quick marking of wires.

Tips are made of high-quality, durable and durable materials: polyvinyl chloride and copper. Provide good insulation. They are plated with tin.

Wire stripper

Stripping wires with this useful tool is a pleasure! It has a classic and proven shape of pliers, so it’s easy to use. The spring mechanism ensures that the arms are pulled to the side, and the working area is equipped with recesses for wires of various sections.

The special design of the blade provides a quick cut of insulation around the entire circumference of the wire without damaging the conductive core. For convenient determination of the cross section, bright white marking is intended.

Replica Tesa Fabric Tape

Fabric electrical tape has many advantages over conventional:

• high tensile / tear resistance;
• durability;
• excellent adhesive properties;
• high-quality insulation.

The tape is suitable for working with both small wires and large coils of cables. Width is presented at choice - from 9 to 25 mm. The fabric tape is resistant to moderate climatic changes.

Insulating Magnetic Screwdriver

A magnetic screwdriver is a real find for an electrician. Special tips hold the screws and screws, freeing the second hand (there is no need to hold fasteners with your fingers).

For safe work with wiring and electrical equipment, the screwdriver is equipped with a rubber insulated handle. A special recess allows you to hold it even in a wet palm. Thanks to the bright colors, you will never lose sight of the screwdriver.

Wiring detector

Using this non-contact detector, you can easily determine the location of the wiring in the wall. The scanner picks up the voltage of the wires located in the cable channels. Effectively recognizes the track even in thick brick walls.

The wiring detector has a reinforced plastic housing. It is easy to use and configure. To visualize the operating parameters, a liquid crystal display is intended.